[Important Note - For Overseas Customers]
Thank you for purchasing this product. Please read the following important notes carefully before using this product overseas.
1. Legislation and safety standards
This product complies with Japanese safety standards. Please check compatibility with local regulations and safety standards before use in your country.
Certain product categories (electronics, cosmetics, food, etc.) may require certification from the importing country.
2. About electrical products
[Voltage compatible]
When using electrical appliances, please note that they are designed according to Japanese voltage specifications (90-110V), so using them at a different voltage may cause malfunctions.
[Plug type]
Our products use the Japanese plug type (A type or B type).
Please use a conversion adapter if necessary.
[Important notes regarding transformers and adapters]
A transformer adjusts the voltage to suit the requirements of the equipment.
Conversion adapters only change the shape of the plug and do not adjust the voltage.
Using only the conversion adapter without a transformer may damage the product.
[About responsibility]
We are not responsible for any failure or damage caused by improper usage, such as operating the product without a transformer.
3. Language and manual
Product instructions and displays may only be in Japanese.
High-quality texture: This silicone mold can be used with highly durable UV resin, epoxy resin, polymer clay, etc. The inner wall is soft, and the finished product is very smooth and has a glossy, luxurious feel.
7 types of bear shapes: You can make various animal-shaped ornaments. There are many bears with different shapes, such as astronauts, bears wearing bow ties, and sitting bears.
DIY Handmade: You can change the color or add gold leaf to your liking. The translucent mold allows you to inspect the finish as you make your craft, making it easy to enjoy DIY.
Suitable for: daily use, parties, dates, etc. It can also be a great gift for friends on birthdays or anniversaries, making it a very memorable handmade item.
Important note: When removing from the mold, please make sure the resin sheet is completely hardened. If you have any problems, please feel free to contact us. (Finished product not included) Important note: When removing from the mold, please make sure the resin sheet is completely hardened. If you have any problems, please feel free to contact us. (Finished product not included)
Set contents:
Silicone mold A (bowtie/bear) x 1
Silicone mold B (heart/bear) x 1
Silicone mold C (tall bear) x 1
Silicone mold D (sunglasses/bear) x 1
Silicone mold E (astronaut) x 1
Silicone mold F (astronaut/bear) x 1
Silicone mold G (sitting bear) x 1
*The finished product is not included. Only the silicone mold is included.
This mold is used to make bear keychains.
Mold size:
Silicone mold A: 4.5 x 8.8 x 2.9 cm
Silicone mold B: 4.3 x 8.7 x 2.9 cm
Silicone mold C: 9.1 x 4.3 x 2.6 cm
Silicone mold D: 8.9 x 5.6 x 2.6 cm
Silicone mold E: 6 x 8.4 x 2.8 cm
Silicone mold F: 5.5 x 8.3 x 2.8 cm
Silicone mold G: 7.6 x 6.9 x 4 cm
The size information is also shown in the photo above, which makes it easy to see.
Uses: Can be used to make various bear-shaped ornaments.
Color: Translucent (white)
Material: Silicone
Temperature: -40 degrees to 230 degrees
Attention (please read)
① Two-component resin becomes difficult to remove from the mold once it has fully hardened, so please remove it from the mold before it has fully hardened. As a guideline, we recommend removing it about halfway through the hardening time.
2. Cannot be used in electronic resin or ovens.
3. Please note that due to the characteristics of the material, there may be small scratches on the product.
④This is a mold for transparent resin and clay. Do not use for any other purposes.
⑤ Forcing the molded product out may damage the mold.
⑥After use, wash gently with a neutral detergent.
⑦Due to the material, it is easily scratched, so do not use metal spatulas or cutters.
8. Do not leave your creations as they are. There is a risk of them being swallowed.
9. Do not place in direct sunlight or near a fire, as this may cause deformation or deterioration.
10. Depending on the item being molded, there may be areas where pigmentation will occur and discoloration will occur.
⑪Please be careful as it may adhere to printed materials.
⑫After use, store out of reach of children.
Molds are consumables. Continuous use, especially with resin, can cause deformation or clouding due to the heat generated by the reaction. Allow the mold to cool to body temperature after hardening before removing it to extend its life.
