【Voltage Compatibility】
When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.
【Plug Type】
Our products use Japanese plug types (A or B type).
Please use a conversion adapter if necessary.
【Important Note on Transformers and Adapters】
A transformer adjusts voltage to match your device’s requirements.
A conversion adapter only changes the plug shape and does not adjust voltage.
Using only a conversion adapter without a transformer may result in damage to the product.
【Liability】
We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer.
This is a color-rendering-oriented high-pressure sodium lamp with even higher sodium vapor pressure during lighting.
A light source with a warm light color similar to an incandescent light bulb, with good color rendering and vivid colors.The efficiency is approximately 2.6 times that of Panasonic's regular light bulbs (high color rendering type, regular type 150 type), and the rated life is 9000. It is time-saving and highly economical.
Available in high color rendering type and high chroma type, suitable for commercial facilities, etc.
●Manufacturer: Panasonic
●Model number: K-HICA140TFH/N
●Product name: Hykalite
●Color-rendering type high-pressure sodium lamp
●High saturation type Straight tube type
-Type: 140 type diffused type
●Case: E26
●Rated lamp power (W): 140
●Lamp voltage (V): 120
●Lamp current (A): 1.6
●Total luminous flux (lm): 4900
●Color temperature (K): 2800
●Average color rendering index (Ra): 70
●Rated life (h): 9000
●Dimensions (mm): Outer tube diameter 40 x total length 175
●Mass (g): 95
●Ambient range temperature (℃): -40 to +40
[Note]
*Please be sure to use the dedicated stabilizer.
*Please make sure that the tube light circuit length from the ballast to the lamp is 15m or less and that the wiring capacitance is 1.5nF or less before use. (VVF-3C is 15m long and has a wiring capacity of approximately 1.5nF.)
*Stabilization time is approximately 15 minutes and restart time is approximately 3 minutes.
*The lighting direction is free.
*When using the lamp, please confirm that the dedicated ballast is a discontinued product before use.
