ZERO STOPPER Hand Water Stop Temporary Stop Water Stopper for Shower Head JAPAN STAR Nano Femiras [Official Store]

Easily turn the shower on and off at your fingertips. You can set the shower head to have a temporary stop function. Can also be used with shower heads from other manufacturers. Designed to not weaken water flow even with water-saving shower heads. Temporary stop function improves water saving effect.Water volume and water pressure do not decrease and the usability is not impaired. Easy to install, no construction required. Adopts Braille, which can be used safely even by people with visual impairments. Body size: 53X27X53mm ■Body weight: Approx. 23g ■Country of production: Japan ■Material: ABS resin, EPDM [Installation method] (*Described on the back of the product package) ① Hold the existing hose fitting and remove the shower head. ② Hold the hose fitting and tighten this product in the direction of the arrow. Then attach the existing shower head to the top of this product. [Faucet manufacturers that can be installed] MTG Science Tanaka Metal TOTO INAX LIXIL SAN-EI KAKUDAI *The installation screw size of this product is G1/2. Some manufacturer's products that can be installed also have special screw sizes. Please check the thread size of your shower hose before purchasing. [Faucet manufacturers that cannot be installed] MYM, KVK, Gaster, Rinnai, Noritz, Mizutani Precautions for use *This product is made of resin. Be careful not to crush the screws when screwing in. *When using the product again from the "STOP" state, slightly hot water may come out for 1 to 2 seconds, so be sure to check the temperature before use. *If the water pressure is 0.3Mps or higher, please use a commercially available pressure regulating valve. (If you do not use the pressure regulating valve, the water pressure inside the shower hose will increase and the shower hose may be damaged, causing water to leak and causing property damage to your belongings.) *Cannot be used with balance pots or two-valve mixing faucets. *If the connection between the mixing faucet and the shower hose is made of resin, there is a risk of damage due to water pressure fluctuations. We recommend replacing with metal parts. *When shutting off the water, open the shower head and be sure to shut off the water on the faucet side. (The shower head may be damaged.) *Do not use at water temperatures above 50℃. *Water may not completely stop depending on the area, environment, and water pressure. Easily turn the shower on and off at your fingertips. You can set the shower head to have a temporary stop function. Can also be used with shower heads from other manufacturers. Designed to not weaken water flow even with water-saving shower heads. Temporary stop function improves water saving effect.Water volume and water pressure do not decrease and the usability is not impaired. Easy to install, no construction required. Adopts Braille, which can be used safely even by people with visual impairments.