Feature：
*Power Converter Regulator 24V to 12V DC-DC Step Down module 60W 5A
*Full power, high stability, high efficiency output
*Short-circuit protection: Under normal use, the converter output is short-circuited to the ground instantaneously, which will not cause damage to the power converter.
*Overvoltage protection: The power supply is damaged, and the output is automatically disconnected. When the power supply is damaged, it can prevent the high-voltage direct breakdown of the electrical appliance and reduce the damage rate of the electrical appliance.
*Overcurrent protection: The output current is greater than the set value, and the output voltage gradually decreases until the converter shuts down and has no output.
*Over temperature protection: The working environment temperature of the converter can be-40-85℃, when the case temperature exceeds 85℃, the converter will automatically protect.
*IP68 protection grade, waterproof, dustproof, shockproof, in line with for CE, standards
*Over 100,000 hours of service life
Specification：
Model: B05-24-12A
Efficiency: 95%
Ripple: 100mVp
Input voltage: 18-35V DC
Output voltage: 12V DC
Rated output current: 5A
No load current: 0.01A
Voltage accuracy:±1.5%
Load regulation rate:±0.2%
Linear adjustment rate:±0.2%
Service life: more than 100,000 hours
Waterproof grade: IP68
Working temperature:-40~85°C
Product size: 68*58*23mm
Product weight: 0.12kg
Precautions:
1. Make sure all the polarities are correct before wiring. Reverse wiring will burn the converter. Please connect the fuse to the input terminal(the fuse is not provided by the factory)
2. Make sure that the battery energy and voltage are sufficient, otherwise the converter will be in a protection state.
3. for Ensure that the installation environment is well ventilated to avoid over-temperature protection and limit current output.
Packing list:
1*Power Converter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
