Back Button Accessory Dominator Mod Kit Compatible with PS4 Controller, Paddles with Turbo and Memory Function, Plug and Play

About this product: To set the programming function - press and hold the SET button for 2 seconds, the corresponding LED will flash quickly (4HZ), then short press the M1 or M2 button, the corresponding function screen LED will flash slowly. To set the programming function - then press the SET button, the corresponding function will be displayed on M1/2; For example: After entering the programming mode, press the M1 button, the LED will display R1, press the SET button again, the LED on R1 will be on, and the function of M1 will be R1; if you program M2, it will be similar to the description at the top above. To cancel the function - press and hold the SET button for 5 seconds, the programming LED will flash quickly and go out, and the M1/2 function will be cleared. Programming key memory function - insert the rear extension key into the handle. If M1/2 has no function, LED1 will flash slowly (2HZ) for 3 seconds and then go out. Press and hold the SET button to enter the programming mode, and LED1 will flash quickly. When M1/2 saves the last programmed function, the corresponding LED will be on.