Fully Isolated Power Supply voltage over K.E.S [Strengthening] No-load 9.4V KIP-001

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. To improve the sound quality of distortion systems, etc., set to maintain the voltage at no load of 9.4~9.5V (output 1-4) All 5 ports fully isolated circuit Expandable by connecting an optional additional unit (KIP-AD5) with a cable DC output: 9V 500mA x 4/ 9,12,18V, switchable terminal: 500mA x 1 (2.1mm center negative), current capacity used: up to 2A Power supply: Dedicated adapter 12V 2A (included), OLD PLATED DC cable (approximately 60cmX2 approximately 30cmX3) Do not connect or disconnect the DC cable while the power is on. The effector may be damaged. The warranty is also limited to this product only. KIP-001 has high voltage, low loss, and is structurally designed with the top surface of the casing as a heat sink, so the amount of heat conversion during high loads is large, and when operated under a heavy load, the top surface of the casing reaches a considerable temperature, but this is not a product defect. Since KIP-001 is fully isolated, it is possible to support a current consumption of 1,000mA using a current doubler or daisy chain cable, but the top surface of the housing may become hot. We do not recommend using this product with products that consume a large amount of current, especially products that use a large capacity adapter (e.g. HX STOMP-3A, etc.).