Features:
Double BTS7960 large current (43 A) H bridge driver
5V isolate with MCU, and effectively protect MCU
5V power indicator on board
Voltage indication of motor driver output end
Can solder heat sink
Specifications:
Part Name: Motor driver module
Material: Plastic
Color: as show
Size: 4*5 *1.2cm
PIN Definition:
1. RPWM: Right Turn for PWM
2. LPWM: Left Turn for PWM
3. R_EN: Right Turn Enable (High Active)
4. L_EN: Left Turn Enable (High Active)
5. R_IS: Right Turn Current Forecast (May Leave Floating)
6. L_IS: Left Turn Current Forecast (May Leave Floating)
7. VCC: (5V)
8. GND
Connections:
1:
VCC: 5V from Microcontroller(MCU)
GND: GND from Microcontroller(MCU)
L_PWM: for PWM or 5V from Microcontroller(MCU) for (CW) Turns
R_PWM: for PWM or 5V from Microcontroller(MCU) for CW() Turns
R_EN and L_EN: 5V from Microcontroller(MCU)
2:
VCC: 5V from Microcontroller(MCU)
GND: GND from Microcontroller(MCU)
L_PWM: 5V from Microcontroller(MCU) for (CW) Turns
R_PWM: 5V from Microcontroller(MCU) for CW() Turns
R_EN and L_EN: for PWM from Microcontroller(MCU)
Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2)
isolation chip 5 V power supply (can share with MCU 5 V)
Able to reverse the motor forward, two Pulse Width Modulation input frequency up to 25kHZ
two heat current passing through an error signal output
isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply
the supply voltage 5.5V to 27V
Package Contents:
1*Motor driver module
Note:
1. The real color of the item may be slightly different from the pictures shown on the website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
