2 Channel Optical Isolation Module Photoelectric Optocoupler Driver Output Converter Board

Feature: 1. VOLTAGE RANGE: 2 channel photoelectric isolation module, the driver signal voltage is 3.6‑24V, and the output voltage range is 3.6‑30V. 2. HIGH PERFORMANCE: Strong optical isolation interference resistance ability, stable output performance, with high efficiency and good durability. 3. DRIVE DEVICES: Can drive triodes, MOS tubes and other devices that require high voltage drive, and can also directly drive low power 24V relays. 4. CONTROL INTERFACE: Can realize 3.3V or 5V control interface of 3.624V voltage level, after the control terminal is turned on, the controlled terminal will also be turned on. 5. JUMPER CAP: Whether the output terminal is high level output or pull down output can be realized through the jumper cap. Specification: Item Type: Optical Isolation Module Material: PCB Driver Signal Voltage: 3.6-24V Output Voltage Range: 3.6-30V (the output current depends on the specific situation, but the maximum does not exceed 10MA, the total power voltage and current are inversely proportional) Package List: 1 x Photoelectric Isolation Module Note: If it is a pulse signal, please note that the limit of 817 is below 4KHZ, please do not use this module for control signals greater than 4KHZ, otherwise it will not work properly.